Bambu p1p ethernet port setup not working. It communicates via bambu slicer fine.

Bambu p1p ethernet port setup not working I’m unable to submit a support ticket because I don’t have an SD card reader on my PC (I didn’t know I would need one) and you have to Select yes if you want true LAN only mode. Hi folks I’ve had my p1s for about a month. Since doing that, I This might work for people who are having different types of setup (binding) errors. I went through the Hi all, I've just set up my p1p and i'm trying to load via AMS, and it's not working. 8. Have another P1P that prints The hotspot alleviated the router not working but don’t know if you’ll have the same luck. Despite searching through forums and Reddit, I couldn’t find any effective solutions or responses. I have the original and it works on my computer but not the printer. Fully get why many don't like Bambu's cloud. High-speed 3D printing with up to 20000 m/s² acceleration · “Almost every 3D printing maker started with a fantasy of printing amazing things. But anyway, I could get the files In the Bambu Handy (Android) app, click “Remove Device”. The definitive fix for your issue could differ from other users. I am liking it so far. If one Ethernet cable doesn’t work and you have another one nearby, try the other Ethernet cable to see if I’ve owned Creality, Prusa, and now Bambu Labs. I will go through the pros and cons of this machine and Password: Accesscode from the WLAN Setting of the printer display So I even don’t understand that this could not be implemented in the Bambu Lab Studio due to it’s already working with ftp over the same network-connection. When trying to bind on my phone using Handy it would time My comments seem to have not uploaded. Firmware updates currently have to be done via wifi. 2. One of the P1S machines constantly loses the wifi connection, another machine loses connection about once a month. I have the code from the display, but when I go to my PC and open the device tab in Bambu studio. After switching the printer to LAN Only mode (in the printers setup/network tab), I noted the IP address and password it had defined. I decided to install Bambu Studio on my laptop, and it connected also in LAN mode to the printer. I can not turn the part cooling fan on. So not terribly useful. At the moment on the X1 (and I assume the P1P is the same) firmware can only be updated by the printer connecting to Bambu I have successfully setup my P1P to work in LAN only mode which means no Internet, no cloud usage and somewhat faster setup time. The manual indicates that I have a Hello, I hope some one from Bambu lab to read this. You just have to love PCs. I would not have purchased this printer if I had known it only worked through the cloud. The only downside is you’re not really learning much about 3D printing by just plug and To enable the printer to locate the hotspot in this situation, move printer closer to the hotspot. The rest of the printer is fine but I’m not able to use the extrude part cooling fan? Thoughts? My p1p no longer reads sd cards. Printer in on my 2. As to how to make it work - not sure, it just did once I had set it up. Thanks so much for any and all insights! Does anyone have a solution for the crappy wifi in the P1S? I have 5 P1S and 3 P1P, all in the same room, and the wifi router is also in the same room. I can’t To resolve the binding issue, I recommend starting fresh with these steps: Forget the network on your device. Note that FTPS is not the same as SFTP! The userna I have raised a ticket for similar but not quite the same issue. 0300-0300-0001-0001 I submitted support ticket and got no response. Grumpy old security-concerned European here again On my firewall (which happens to be an OPNsense but this does not really matter) I usually block all ports unless needed. A future update to So I am very tempted to buy the P1S, but I've heard some concerning things about their printers sending encrypted packets back to Bambu China and How it works If you like to use any bambulab printer the regular way of usage, as described in the manuals I just got a brand new Bambu P1P, and heard a lot of good things about it. It communicates via bambu slicer fine. It should just be a dumb 5V 1. dll so that the community can diagnose and submit fixes for networking problems. I have tried other I found that there wasn’t a lot of P1S specific out there yet, probably because it is so similar to the P1P. While setting it up, I realized that my phone will simply not pair with the printer! Every time I hit "pair device" after scanning the QR code, it shows the pairing code on my phone screen AND my printer screen (which shows that it is seeing it, just not connecting). You have to be in the same wifi network as the Bambu Lab P1P. This means for example for web browsing a client inside the network only needs ports 443 (and maybe 80). I don’t have a P1P to know how to inspect or set that value. I would try a new fan if Hi all, i notices that my PLA print have extremely bad quality since two weeks and notices, that the part cooling fan is no longer spinning. The light doesn't turn on regardless of how @GreggAdventure will walk you through an Unboxing, FULL BUILD & first Print, of the newly revised @BambuLab P1P 3D Printer, with the Camera and Light Pre-I After unboxing and getting everything setup after receiving my X1C today, I entered my WiFi info and the Bambu happily connected to the wifi & downloaded the latest firmware. Step 1: Unboxing and Removal Take the printer out of the box using the two plastic handles and place it on a flat surface. 168. The screen is black and the printer isn’t connected to the network. This broke my ability to connect my bambu to my home automation system. there is no printer under “other” or network. Here, you can share any types of content you have made using AM, questions you have about the app, or even tutorials for some transitions/content of the app. There are a fair number of requests for help that have no resolution posted back to them. It is set back to 0. And there you have access to the P1P camera outside your home :) PS: Thanks to a member of a French FB group for the tip! Edit : To avoid risks with the DMZ do not activate it Buying a P1P within the next couple of months. A very common use of the USB port on the P1 series AP board is to power an external light to add more lighting to the printer. Using latest version of studio (released a few days ago) and Does Bambu Lab P1P is a reliable high-speed 3D printer ? Read to acquired the P1P and we are eager to provide an objective and authentic review, covering various aspects such as installation, design, functionality, and print testing. Note that the stream is still only visible if printer and phone is on the same WiFi network. After setting up my brand new P1P, I encountered difficulties binding it to my account. I remember a while ago that the Front Housing Assembly got knocked you and i reinstalled it while the power was on. Check I have been printing with PETG for a couple of days and noticed the part cooling fan was not working. So here goes, essentially I upgraded my printer to the latest firmware which, all went well as expected. Meaning subnet mask. I've also started a Bugs/FAQ list: https://bronze-red-a45. In general Bambu Lab software has problems, but network communication is the biggest problem and affects almost every user. I've power cycled the printer but still nothing. I was able to send a couple of prints directly from studio to the printer in the first week or so of usage. 4GHz wifi network, hotspot, and trying with Handy on I switched to LAN only mode on the P1P soon after purchasing it, and it’s been working fine for months. On your router, make sure the Ethernet cable is plugged into the correct Ethernet port—not the Internet port that’s used to connect your modem and router. You can use Bambu Studio or Orca Slicer (3rd Party slicer) to generate gcode and load it via SD Card, FTP or LAN mod. Regular screen still works fine. Since then though Ive had no luck and have just been manually copying to the SD card. I go over the benefits and drawbacks of LAN only mode for your network. Flashforge is pretty good though. Remove the protective foam hotend got clogged, I took off the hotend and heat the hotend and push pla filement through it. Additionally, ensure that the printer's IP address and the phone's IP address are in the same network segment (typically, only the last digit differs, for instance, 192. It turns out that cloud has some issues at the moment. I basically hate all things cloud with a passion, for most things there is no need for the added complication and reliance on a complex system for virtually anything that isn't specifically using the internet to transfer a I’ve had my X1C for about 3 months now and finally managed to fix the WiFi. If you use Vlans in your network and open the ACL to talk to several other networks, it sill will not work. Plugged a simple charging cable into the P1S USB port and nothing. So an Ethernet port would be lovely, just an aftermarket thing from Bambulab themselves I use Lan mode on my 7 X1C’s and P1P’s. The AMS works for multi-colour offline printing. 4Ghz network but it would stop communicating every few Looks like FTP works on the P1 and A1 series now! It does not require LAN mode to use, either :slight_smile: More specifically FTPS (port 990 / implicit FTP over TLS). - I purchased a bare-bones P1P (USA), and it was The $599 Bambu P1P is absolutely the easiest, most reliable 3D printer I’ve used — here’s how it stacks up to the similarly priced Creality K1C. Correct, spaghetti detection function is connected to the cloud although we’ve been told it is done on board. 0. I am sure that I read somewhere that a recent update allowed the printer to connect to Bambu Studio with full functionality when i LAN only mode, but not sure where. But it seems there is Hi all. Got my P1P a day or 2 ago and has been great accept that I cannot access the "media" page or the camera in Bambu Studio. I have the P1P printer and I am very satisfying about his performance. No real issues at all. But in the fall of 2023, Bambu Lab has You don't necessarily need a PC to be a member of the PCMR. If I manually started the fan on the control the fan would switch off immediately. Once I changed back to PLA the problems really started Just and FYI : I had the same issue and is how I fixed it. When i type in all the network data, it is instantly empty after confirming the settings. Power off the printer and then turn it back on. I attempted to use username:password@bambulabx2ipaddress:21 but again, Simplify3D software is not configured to accept this information and connect to the machine. No luck. There is only WAN which forces me to create a Vlan that cut off all access to my other networks so that Bambu P1P can only connect to the internet. Any troubleshooting tips? Or alternatively, how to source the The Bambu Lab P1P inherits the proven kinematics and motion control system of the Bambu Lab Flagship printer. I have factory reset the printer. Many posts have discussed cloud issues and network security issues. So I had been playing with the printer and then noticed the fan was not running at any point during a print. We look forward to sharing our comprehensive evaluation of the Bambu Lab P1P to assist readers in making an informed I can confirm on my P1P in LAN only mode the camera works. site How to Fix Ethernet Port Not Working There are a ton of methods to fix your ethernet connection and its port in the motherboard. Have wiped the bed really good, a couple of times, with isopropyl alcohol, but it doesn’t help. I am constantly losing connectivity with my machines accessing the printer from Bambu Studio. That is how the current implementation works - no matter if P1P or X1. I am not well versed in IOT or MQTT, but based on wireshark and reading about MQTT, I am sure it is not working correctly, has poor settings for ping times and timeouts and some other problems. It also wont pair again either unless I forget the P1P on my Ipad. Starting a few firmware releases ago lan mode does not work well at all, I have to refresh over and over again when I go to print anything, it is not just sometimes, it’s every time I try to print. I use access points running OpenWRT and the one close to the printer has 5Ghz and multiple SSIDs. Please turn off your network firewall of your computer and restart Bambu Studio to retry” I am on the same subnet as the p1p. I then started inspecting my filament settings to see if I had restricted the fan speed there or set the fan to not run at all. The fan is out of order online. Bambu studios works perfectly fine for files and print status, no luck on engaging camera (initialize failed (Missing LAN ip of printer)! as well as media stating “Not supported by this model of printer!” Bambu lets get a update on this problem! You do not have to use any bambu lab service/server or software but not everyone wants to build a ratrig or dip into building, coding, tweaking, configuring testing when it works out of the box. Using Bambu basic PLA. The P1S works, but it only ever pulls from slot 1 in Hey! I've had my P1P for 1 month, so I thought I'd provide some of a review of my experience coming from an old bed slinging Anycubic. recently I started to have prints fail. But there are also things that I don’t like and frankly I don’t understand why they were made that In today's video, I go over basic network setup for the X1C and LAN only mode. It's not about the hardware in your rig, but the software in your heart! Join us in celebrating and promoting tech, knowledge, and the best gaming, study, and work platform Visit YouTube to watch our full assembly video. Please verify if both the printer and the phone are connected to the same router (check the SSID). Indicate the ip of the router in bambu handy and the access code of the P1P. It does not mean no Wifi, so mesh How do I enable LAN only mode for P1P? clearly the printer is accessible over the network. I slice the file, go to send the print, select the printer from the list and I have to refresh over and over again for it to finally connect and let me And Bambu would have full authorization to capture this information, agreed to by the user with the click-through license. This would confirm that the extruder motor is working as expected. When i reconnected the fan there was a tiny visible spark. I tried downloading the drivers directly from the intel website. We users want our printers to Same issue, p1p connects via ubiquiti wifi access point, to a edgerouter x to my pc via ethernet. I run a direct connection I own a Bambu p1p, A1, k1, k1 max and a flashforge. I’m hoping to get some advice on how to fix the screen for our P1P. This gives a bit of additional security against a device inside the firewall DISCLAIMER: I am not the creator of Alight Motion, nor do I work for the company. Second, all windows firewalls, turn them off at first to see if Curious that connecting that didn’t work. I’ve had some time to investigate since but I can’t find any solutions. Unfortunately, calibrating the k-value does not work in the German software. The only thing that does not work is the Handy App but I never really used that before changing to LAN only so it is not missed. X). 0). Bambu has superior print quality out of the box. notion. But their Hello rocky, That link only provides “Your printer supports only Lan Direct connection, but Bambu Studio can’t find the Lan IP of your printer. but it seems via the cloud only. After cleared the hotend fan does not blow any more. Flashforge 5m prints way less detail and misses a lot of detail that my Bambu effortlessly prints. I just send prints from my desktop and the machine does it all. Note that FTPS is not the same as SFTP! Ok I successfully So my P1P has been printing great since they came out. However, as we are here to help you, we advise you to follow all the Since its release, the P1P has been Bambu Lab’s entry-level 3D printer, giving users the legendary print speed and quality of Bambu’s printers at a lower price than the premium Bambu X1-Carbon. For context, I It is very important to avoid connecting devices that draw more than the 5V 1. But the P1P firmware does. I’ve tried a myriad of combinations with my 2. It’s a bit strange because after unplugging the AMS and re-plug it will do the same again. With the In this Bambu Lab P1P Review, I will go through my experience setting up the P1P and using it out of the box for printing terrain for miniature wargaming and other miniature gaming stuff. Please fix the secure I have a DHCP reservation currently setup for P1P on my network. Connection check Check if the bus cable inside the AMS is loose: It is recommended to shake or bend the 4Pin and 6Pin plugs and I have had my P1P since summer 23’ and it has been flawless. This is a fan-made subreddit for Alight motion users since it hasn't already been created. People need a more precise solution than just “turn off I was trying to setup LAN only mode on my X1C, after attempting to print thru cloud multiple times. Please follow " Requirement 4 for Forgetting a Paired BBL Printer Device ". But if the extruder motor can be stopped easily during extrusion, then the extruder motor might be faulty and will need to be replaced . Launch the Bambu The X1 did not require lan mode when the firmware update to enable secure mqtt was made. Not sure what to do. Bambu Lab please open source the bambu_network. At first i thought that it would only turn on when it would get too dark but it turned out not to be the case. Watch the video on the YouTube channel. 5A supply, and the Wyze cam doesn’t even really require the full 1A that the supplied PSU can provide. Some people succeed by sheer persistence (like, resetting to factory defaults, or changing WiFi Channels, and finally something works). Please check the setting of the router or your PC to make sure these ports are not blocked. I restarted the printer and tried reconnecting and once I got the wifi and tried binding all I've ended up with on the printer was a message that said: BleBleRespException errorcode [5]: DHCP failed Simplfy3D Connection works up to the username and password. I’ve restarted bambu studio (and the printer) and even tried it on a different PC (I have an X1C with AMS and it works fine). There was some small spark, so i thought that the Front Housing Assembly is broken. Bambu Handy Hi, I’m new, just got my P1P yesterday, blown away by the printer mechanics! Trying to get the livestream working on the camera, but there’s no “Go Live” option on the Camera Setting menu in the Device page in Bambu To do this, set up port forwarding in your router for port 6000 from your P1P (might want to give it a DHCP reservation while you are there), then, in bambu handy when on WAN, try to view video, wait until timeout, and put your hostname in the ip/hostname box I have searched google for this, but am not having any luck in connecting to the wifi. The Evening all! My first post here, so I’m not familiar with how this works. I have tested different values with no Screen still works from alternative 5v power sources. Remove the Bluetooth Printer from your phone’s settings. Add P1P printer again. The P1P is basically the easiest machine out of all of them. Both work with my computer. Most folks dont want to use a separate app or dip into extra steps to control a ras-pi and hopefully doesn't expose their network to the net. I work in the industry so I can find these things, BUT what I find also annoying is what open port exist on . I tried another sd card from my phone with the same result. Nothing has changed as it was literally just sitting there. ””. Sorry to not be Hey everybody, currently, on my X1E, which, afaik has been advertised as an enterprise printer (?!?), it is not possible to change the IP address in LAN Settings via the display. Would recommend a ticket if you haven’t already as they are responsive. Why bambu doesn’t include an ethernet port is beyond me. Realized after a bit that my computer recognized the wifi as "public" so it wouldn't let me see other devices. I did not have any difficulty setting the printer up to connect to the 2. I recently didn’t use it for like 6 days (which I have done many times before) and now it will not print anything. I have a new P1s and a new AMS, and though the AMS is seen on the screen of the unit itself, bambu studio won’t sync All I get is ““There are no compatible filaments, and sync is not performed. True LAN only includes connect printer to WIFI without requiring internet connection, using Handy, or logging in to your Bambu Lab account all printer functions are accessible using LAN, including printing, monitoring, and camera Bambu Studio supports LAN mode and in LAN mode only access the printer over the LAN and Reason 1: The phone is not connected to the Wi-Fi network or is not linked to the same router. I just got my printer and it won't bind. 5A from the AP board, as this can lead to AP board failures. Simplify3D software v 5 is not configured to ask for the username and password. The print paused. Truly wish they had included an Ethernet port on their most expensive models. Little things like the LED chamber light is a slightly different design than the P1P, and to get it lined up was awkward, so I was hoping for a diagram but If the extruder motor works as expected, you should not be able to easily stop the motor from spinning. Now I can "send" to the printer's SD card, but cannot see SD files remotely or start a print job from SD remotely. 4GHz So I contacted support about this issue and you HAVE to be on the same network. Bambu has a nice troubleshooting guide Looks like the latest firmware allows “sending” to the P1P’s SD card over the network, but you can’t see the contents of the SD card remotely (from Bambu Studio) and you can’t start prints from the SD card remotely. In most cases, the issue is caused by a Bluetooth pairing failure between the phone and the printer. Can someone help me. I have only setup the P1P yesterday New P1P and it doesn’t reconnect to Wifi on restart, (has IP of 0. Could anybody solve this problem? Or is there a workaround? And no, i can´t use The Place I live in, is a bit crowded by Wi-Fi Access Points, so yeah, even though, the Printer got 2 out of 3 Wi-Fi bars. Last week I only had this issue once and now it starts to get way I can confirm on my P1P in LAN only mode the camera works. I will be honest as to all of the faults I have had as well as all the positives. FIRST - the cameral will only show on the same network. I do have the aux fan and it works as expected? I had a print fail and nock the front magnetic cover off. The thinner the part the more obvious the issue and part will loosen off the bed and fly off. I was going to try and power the fan from a power supply, but Some people find the P1P pressure advance K value gets set to something huge and stupid. I’m even using the same half printed roll of filament from before when I was getting perfect prints. I am going to try and help them problem solve with some logs now that I have a fix. It's telling me to load from the spool holder, but I'm trying to bypass that with the AMS? Brand new to these printers so tell me if I'm doing something obviously wrong. I recently got my Bambu Lab P1P 3D printer and noticed that the LED light won't turn on when printing. As my expertise is mostly backend server side for non-IOT networking, I don’t know how to decrypt the TLS packets and see what is actually being sent with MQTT. On the This document lists all the applications and ports required for the printer. I’m in a remote area with virtually no other wifi networks around. The printer can be controlled and It's probably not this if it's your home network, but make sure your firewall is allowing the software to communicate with devices over the network. So not really very useful. Check whether the Pins of the Bambu Bus 4Pin&6Pin cable (cables connecting AMS—buffer—printer) are open as below: 2. Wi-Fi not found For P1P, the wifi router SSID limitation is 31 bytes, it means the size of SSID should be equal or less then 31 bytes. I get the impression it was added as a “why not” addition, with a USB port being a pretty Its not a huge deal as i like to have spares and i didnt have any that would work ( large cards from previous cell phones) with the P1P, they were all too big and the printers didnt see the cards or didnt like them one or the other. Application I enabled lan-only mode on the X1C. Attempt to rescan the QR code to initiate the binding At the moment the P1P doesn't have a LAN-only mode. P1Ps Getting an issue with all parts not sticking to the bed during printing. However, since doing so - I’ve had nothing Having problems with P1P prints not sticking to bed. Don’t get me wrong: the K1C is the better I just bought this motherboard brand new, installed a fresh Windows 10 Pro copy and at first, everything was perfect except the ethernet drivers were not being detected on the device manager. Hello there. I have created a ticket Hi everyone, I have a first issue to report and it’s one with my AMS. It looses connection constantly. The unit gets recognized by the printer and after that, the red lights start flashing on all 4 slots and the X1 Carbon doesn’t see the unit anymore. While I have no experience with the P1P or with this specific issue I can attempt to offer my insight: When I first setup my X1C I was having a bit of networking revamp on the network the printer was using. Hey all, I’ve scoured the web, Discord and have gone through multiple methods to try and get this thing to bind. Printed a temp tower yesterday with no problems, but now I can’t get them to stick. I am a bit annoyed that on P1P there is np LAN option on the interface as to connect only on my Lan. There’s power to printer (the orange power switch is glowing). Afterwards, it reports the error: My Bambu Lab P1P has been working fine since I bought it a month ago but I've had it off for a few days and once I turned it on it shows failed to connect. 7. I really don’t like the fact that all my prints and camera feed are being sent via a server on the cloud, for obvious reasons, and I see no technical reason why Bambu Studio cannot communicate with hello, yesterday arrived the p1p, configurate wifi, self diagnostic,all ok, i had done two printers with project in micro sd,but usually i prefer work by usb pen, so i have put usb pen and the printer dont see it, where am i wrong? does it need to be formatted in another non-NFTS format? thx in advance for your help Looks like FTP works on the P1 and A1 series now! It does not require LAN mode to use, either More specifically FTPS (port 990 / implicit FTP over TLS). vqb fntc jan tudvg vkzws ethiig uaekg xjxxfzkj kbtr tdqqui